Stage 10: Heat It, Scrape It, Sand It, Seal It
This past week, besides finishing the floor prep, we also tackled some of the more tedious, but necessary tasks that we would eventually have to complete. Also, we have had some amazing weather the last few days here in Texas, but it isn’t going to last long:( So we work with the weather since we can’t park the bus under anything.
Removing the reflective tape and lettering….everywhere.
Why? The reflective tape was cracked, so when we repaint it, that will be the first thing to go and chip off. I have to say, 360 degrees was monotonous to the say the least:) But I can find some joy in those types of mindless tasks. Anyway, We started with a sander with wire wheel attachment. It was taking a while to remove the stickers and was really eating through the paint easily as well. Just using the paint scraper on the letters was working ok, but the old, cracked reflective tape was a b****. So, I jumped online to skoolie.net and found a few great solutions.
Paint Scraper with Heat Gun- to start, if this doesn’t work..
Rub Diesel/Paint Thinner on It and let it set for a few minutes..then Wipe It off…Finally..
Sand It All Down
I remembered Crab just received the Heat Gun (Wagner $20 from Amazon) he ordered for a separate Didgeridoo Project we want to tackle:), and grabbed it out of the garage.
We finished one side and the rear of the bus in one afternoon. Although we were able to remove the stickers, the sticky residue was still being a problem. We figured we will try sanding it off when we were done removing the stickers.
Day 2 Sticker/Tape Removal
Moving on over to the passenger side of the bus 🙂
We are DONE! SIKE!
DAY 3 Sanding/Sealing
Of Course I thought we were completely done with sticker removal, until I glanced out the kitchen window and realized, nope. We forgot the tape around all four emergency exit windows and their letters! So, the next day, I went back up the ladder and finished the job…for real this time!
A couple of hours later…..
All in all, I don’t really know if we wasted time by just not sanding first. Maybe we could have if we had a better tool for that job. But I think this process worked for us and the tools we had.
Next up , More Demo and the story of making Chitty Bang Legal!
or
or
or
Leave a reply to The Crabs’ Homestead Cancel reply