Posted on 1 Comment

Video: Places to Park Your Skoolie/TinyHouse, Features, & Costs..plus a rv resort review!

Come learn from our mistakes and successes!! Find out where we have been parking our skoolie, what features come it, and how expensive is it? Also check out my review and the features of distant drums rv resort in camp verde, az.

This is all information we have learned from traveling on the road the last year and half and I hope it helps!

Article, as featured in Bus Conversion Magazine: Where to Park Your Bus

Advertisements
Posted on Leave a comment

Tiny House Comforts: Light Switches

One of the many changes/additions to Chitty Bang that we have added the last few months before we took off again! These switches work great and the Velcro works Great!

Here is the link to the switches: https://amzn.to/2H9wvKq

Originally we ordered these and only got 1, they ended up sending us 5 with the next order and we are returning the single they sent us.

Posted on 2 Comments

Bills In A Rolling Home: Basics

Check out our new video🌞!

💵BILLS IN A ROLLING HOME: BASICS!

This is our take and experiences from the last year and I hope if anyone has been wondering about what some of the costs 💰that come with traveling with your family 👨‍👩‍👧‍👧are…they get a better idea from this video! Of course everyone’s situations will be different depending on their “rolling home” 🚎and individual needs! But let me know if this helped you out😁

#rollinghome #bills #tinyhouse #buslife #skoolie #travel #wander #billswhiletraveling #rvbills #busbills #getlost #travelingfamily #wanderingfamily #chittybangskoolie

Posted on Leave a comment

Stage 23: Ceiling Material, Some Prep, and Completion

After we finished the wall panels (that we later took down to just install studs), we moved onto the ceiling. We knew we did not want a tongue and groove wood look, as we like more of the “industrial rustic modern” look, yeah it is a lot but describes our style perfectly 🙂20151109_143909

So we found this FRP board from Home Depot that flexed well in the store, and was used in commercial bathrooms for the walls and ceilings. This meant that it was also mold resistant and seemed like a great idea! So we bought a lot, of pieces (maybe 14 or so for extra) and headed home to install.

20151111_142406

Well, it sounded like a great idea. It appeared to be a great idea. But as we placed the FRP board up and screwed it in, and started curving it, it cracked at the screw place. Ripped right through that board. Maybe there is a better way to fasten that stuff to the ribs. But we did not know of it. Back to Home Depot it went, and back to the drawing board we were.

We had the idea of a tin roof for the ceiling as a back up plan while we were brainstorming ideas before we decided on the FRP board. I was worried about rust and road noise…maybe it was to much metal? But then we were out off options and determined we would have a bigger success with this material, so we went for it.

20151109_143932

We had to secure the newly loomed bus wires up so we could fit the tin panels over them easily. The loomed wire fit really well inside of the grooves on the tin roof. So, the prep for that took a short while…yay more TEK screws for metal. Guys, if you don’t know, I am not kidding. That was hard. I burned up screws trying to push them in. It was pretty eye opening for me lol. We attached also with washers on the outside of the small tek screws so the screw head would not eventually pull through the tin.

20151111_142414

I wish now that we would have added some sort of a vapor barrier before attaching the panels. I did not think of it then, nor did I have an understanding of what we were really doing before hand, haha. At least I can admit it right? But that is why we started this journey, to learn. The vapor barrier would help break up the contact between the tin metal roof and the metal ribs we attached it to. So when it is cold outside the bus and warm inside, there is condensation at the screw points. That would be one of the “If we converted another bus or worked with a metal building again, this is what we would do” lesson that we would add to that list. 

20151112_180148So if you are planning on following suit with this build and using this material for the ceiling, and you could even sacrifice the head room (which we really couldn’t since the hub is 6’2”), maybe even spray foam over the ribs or add wood over the ribs then add the tin. Or just do a plastic sheet. I hear that would be sufficient as well. And make sure you put screws on every rib…this will reduce vibrating road noise while traveling.

20151112_180132Then, the transformation process! We laid 4 pieces across the width of the buses long ways to get the most our of the space and to be sure we had enough places to screw in the panels. We also used 2x4s to brace the panels as we were screwing. Was like having two extra sets of hands! We made sure to have a couple of “ridges” overlap each other when putting them together, as well.

And we worked….

20151112_180210

And screwed….

img_20151114_101630

And sweat until we were done!

20151113_153728

And how sweet it was 🙂 We were so happy with how it turned out too. Made it even more open to us and the reflective material really brightened the bus up. Old Chitty Bang looked like a brand new bus!

20151113_163055

Crab painted this piece that came out of original Chitty Bang since he will be doing most of the driving 🙂 Why am I not surprised at the colors? lol.

20151211_170827

Next we put in a brick wall! Ok….faux brick wall…lol. And added some braces to the front and rear headers of the bus:

Stage 24: Personalizing the Walls and Adding Braces

or

Back to Stage 22: What We Thought Was Next- Hanging Walls