fbpx
Advertisements

Tag: tiny house living

10: School Bus Sticker Removal

Stage 10: Heat It, Scrape It, Sand It, Seal It This past week, besides finishing the floor prep, we also tackled some of the more tedious, but necessary tasks that we would eventually have to complete. Also, we have had some amazing weather the…

Advertisements

8: School Bus Floor Holes and How We Filled Them

Stage 8: Filling those Stinkin’ Holes After much research, discussion, helpful advice from Skoolie.net and Skoolie Converters on Facebook, and time, we finally decided what to fill the holes with! Bondo would not work since it was not water repellant or flexible. Welding would…

7: School Bus Rust Removal Part 2 of 3

Stage 7: The Rust Double Tap This week we began our task at completely abolishing all floor rust we could see by doing one last sand job over any Rusty spots and using a new fave product, Corroseal. This product was recommended to me…

6: School Bus Ceiling Demo- DIY SKOOLIE BUILD

Later in the week, we tackled Stage 6 of Operation Chitty Bang, which was Removing the Ceiling Panels and the Fiberglass Insulation. I don’t know which part has been the most strenuous so far, the seats, the floor, the sanding, or this one. Most…

4: Washing the School Bus Skoolie

Later that night, after removing the rest of the flooring, heaters, and upper side panels, we decided to go ahead and give Chitty Bang a good Scrub Down so we could tell where the dirt ended and the rust began. We blew it out…

%d bloggers like this: